Reclaimed Barnwood - $1,800 (Bozeman)

condition: salvage
size / dimensions: 1x10 308sf

more ads by this user

Reclaimed 1x10

Approximately 25 - 16’ lengths or 308 square feet. Premium material resawn from 2x10 tongue and groove decking salvaged from the old Bonner Sawmill roof structure

Nice patina, chaulky white paint one side
Bandsawn brown with nail holes other side

Straight with minimal or no cupping, warp or crown

There are a few shorter lengths included
Depending on what you are using as a substrate plan on no more than 10% waste.

Perfect material for a kitchen or bathroom wainscot …. Inventory should cover about 36’ of wall at an 8’ height installed by capable hands or between 90 and 120 feet of wainscot at standard chair rail height depending height of baseboard and chair rail (you could stretch it out to 120 feet by raising the bottom board up behind your baseboard and capping it with a chair rail trim). This material is appropriate for either indoor outdoor use. I used the bulk of thr salvage as a structural deck in a timber framed guest house (rustic interior wide plank flooring ) and as a vertical barnwood siding on a timber framed home in Big Sky). It’s a very beautiful reclaimed material without the typical challenge encountered using typical barnwood and comes in primarily 15-16 foot lengths unlike the manufactured 4 foot skins flooding the market.

We also have salvaged western red cedar in lengths from 4’ to 24’ however also in limited quantities AND quite a bit of reclaimed barnwood in brown and silver - gray tones in widths from 4” to 14” heavy to 8” and lengths from 2’ (for vertical applications above windows ) to 20’

The last cut package we prepared averages 9” widths and 8’ in length

1x10 resawn material 308 sf offered at $1800
Western red cedar $4.85 per sf
Barnwood packages $6.00 per sf

Send me your plans and we will prepare a color coded cut package to eliminate waste

Reclaimed, and salvaged, 2x and timber
In Doug fir, red and white oak, mixed hardwoods, and western red cedar

Can source anything your project might require if we don’t have it in stock.

Pre stain available on request

post id: 7750881996


best of [?]